RF Wireless Remote (Included CR2032 Battery) (Must be paired with the product before use)
Auto Swing
Yes
Heating
High ● Low
Dry
Hot ● Cool
Ventilation
High ● Low
Timer
15 ● 30 ● 60 ● 180 ● 360Minute CONT.
Air Volume (Ventilation)
220 m³/h
Air Volume (Circulation)
130 m³/h
Noise (Ventilation)
48 dB
Noise (Heating)
48 dB
Wattage (Ventilation)
34 W
Wattage (Power Consumption)
1,200 W
Filter
Antibacterial Filter
No. of Motor / Blade
1/1
No. of Exhaust Outlet
1
Installation Hole Size
242mm(H) x 238mm(W)
Louver Size
280mm(H) x 280mm(W)
Power Cord
Not included
FAQ
Is Thermo Ventilator provided with power cord?
No, the Thermo Ventilator is not provided with power cord. Please purchase them in market.
Can the thermo ventilator adjust manually the temperature of bathroom?
No. When the temperautre is reached to the certain high degree, it will be off until the temperature is lower again.
Can the thermo ventilator be modified to install into different installation ways that are not mentioned in operation manual?
No. It is suggested to install based on the installation manual.
Can the filter be cleaned by water?
No, it is not washable. The filter is equipped with an anti-microbial layer. If it is cleaned with water, the anti-microbial layer will be washed away and the anti-microbial performance will be thus affected. It is suggested to clean by vacuum cleaner.
Does the thermo ventilator need maintenance?
The filter, front panel and panel base of the thermo ventilator should be cleaned regularly to prevent abnormal operation that caused by dust and dirt. For the cleaning guideline, please refer to the operation manual.
How long should the thermo Ventilator be cleaned?
It is suggested to entrust a professional to clean the heater, and remove dust and dirt from the main body when the thermo Ventilator has been used for around 2-3 years.
For service charge and appointment of cleansing service for thermo Ventilator, please contact Service Centre at 2406 5666.
How is the filter cleaning indication lamp off?
Press and hold the MODE button on control panel for 3 seconds. A “beep” sound is heard to switch off the filter cleaning indication lamp and reset the timer.
How is the remote control paired with the Thermo Ventilator?
The remote control must be paired with the Thermo Ventilator before use. Within one minute after the Thermo Ventilator is powered on, press and hold the buttons “HEAT” and “VENT.” on the remote control for 3 seconds to complete the pairing process. When the pairing is successful, three beeps will be heard.
Store
Products
